Single Arm Series 80W | 30AH Lithium | 10W LED - Solar Street Light

Australian high quality solar street light designed to last 20 years. Built with die cast aluminium & 316 marine grade stainless steel.

This light is the least heavy of our range weighing 16.3kg. It can fit on a light duty pole. 

We have added the single arm light head that is found on most street lights in Australia.

This solar street light can provide P4 Class Lighting for 

  • Paths and walkways
  • Car parks
  • Caravan parks
  • Schools


  • 80W Solar Panel
  • 30AH (384Wh) LiFePO4 Lithium Battery
  • MPPT controller
  • 10w LED
  • Movement Sensor Option

Day | Night Comparison

Solar light installation at a marina in NSW using a 10W warm white 300k Nichia LED
Solar Street Lights - Single Arm - 80W 30Ah 10W LED Off

Coastal Corrosion Prevention

MPPT Controller for Solar Lights

MPPT Controller

For our products, we use an MPPT Controller. This allows us to utilise 100% of the available power from our 80W Solar Panel.

if we were to use a standard PWM controller we would utilise only 64.8% of the available power of the 80W Solar Panel.



MPPT Controller

By using an MPPT Controller we are able utilise 100% of the available power from our Solar Panel.

Adjustable Brightness

We can adjust the brightness to conserve energy when there is low activity

Aluminium Housing

All our Solar Lights are encased in aluminium and 316 marine grade stainless steel screws

3 Year Warranty

All our Solar Lights come with a 3 year warranty


Solar Panel Specifications
Solar Panel
80W / 18V / 3.89A​



Cell Efficiency

Operating Temperature
Hail Load
(60m/s (200kg / m2)
Tilt Range
0° – 90°
LED Specification
LED Chip
Beam Angle
60° x 150° Asymmetrical
Total Lumens
1,376 lm
Light Source
Light Efficiency (Flux)
Max Lux at 4 Meters
25 lux
Colour Temperature
3,700k – 4,300k
IP Rating
> 50,000 hours
Movement Sensor
Optional – Infrared / Microwave
350 x 120 x 75 mm
Diameter For Side Entry
55 mm best fit for 48 mm spigot
Battery Specifications
Lithium LiFePO4 Battery Size (12.8V)
30AH / 384 WH
Work Time – Bright Mode
40 Hours @ 9.5W
Average Battery Charge at Dawn
Battery Charge Time 0-100%
5 Hours
Charging Temperature
Discharging Temperature
Storage Temperature < 1 Year
Physical Specifications
Solar System Housing
Solar Panel Package Size
1050 x 590 x 140 mm
Solar System Size
990 x 495 x 120 mm
Top Spigot Pole Size
60 mm
Total Weight
16.3 KG
Hot Dipped Galvanised
Pole Height
Up to 6,500 mm
Pole OD
90 mm
Single Arm Length
300 – 500 mm
Single Arm OD Spigot
50 mm
Luminaire Distance from Ground
3,000 – 6,000 mm
Pole Footings
450 x 450 x 1000 mm Rag Bolt with Lowerable Hinge


You can rest assured that you'll be getting the best service from your local Australian provider

Lithium Battery

Once our batteries charge for the day, we let them rest until sundown.

Designed To Last

With Solar Street Lights Australia, you can expect that they will last for over 20 years

Easy Installation

For customer convenience, our solar street lights are easy to install.


Grid at 1 meter intervals


4m height

Lux Diagram for 10W LED at 4 meters high

5m height

Lux Diagram for 10W LED at 5 meters high

6m height

Lux Diagram for 10W LED at 6 meters high

Performance (Mackay QLD)

Below is a daily performance report for this light. For this report the location is set to Mackay in Queensland,

View our calculator to see more performance reports at different locations.